Documentation

Everything you need to maximise the performance of sales staff or distributors on customer visits: a tool for centralising and sharing documentation between manufacturers and distributors. 100% synchronised and up-to-date documentation, working offline, with the option of sending it by email.

The expertise and know-how of a manufacturer

The creativity of a start-up

The responsiveness and range of a specialist distributor

Reassembly without dismantling

Since 2010, we have developed several ERO Joint® mechanical assembly solutions. These innovations, developed and optimised with our partners Gates, Esbelt and BEHAbelt, are protected by 10 international patents.
They provide you with new maintenance solutions and enable you to replace your belts and Conveyor Belts quickly and easily.
To further reduce production line downtime, we have also developed tensioning and rapid assembly tools.

Available for T10, AT10 and HTD8M pitches in widths of 16, 20, 25, 32 and 50 mm, with steel, Kevlar or stainless steel reinforcement.

Quick and easy assembly. ERO Joint® HP can be produced with any type of coating, guide and machining.
Its mechanical strength is superior to all other mechanical assembly systems.

Teeth available: H, T10, AT10, T20, AT20, 8M, 14M, AT5, AT10V & T10V (with integrated drive guide, new)
Standard construction: Light grey 90 shore A polyurethane
Cords: One polymer cord wrapped around the stem in each tooth. Cords arranged in parallel
Width: Any width from 10 to 450mm (standard junction plates 150mm except AT5 100mm)

Open polyurethane Timing belts for your translation applications

- Quick assembly without dismantling the machine (covers, pulleys, axles, tensioners, etc.)
- Mechanical strength for long-lasting repairs
- Complete solutions including assembly tools to facilitate installation and further reduce intervention times
- The only mechanically assembled driving belt solution

The Poly Chain® GT Carbon™ ERO Joint® Ultimate solution transmits half the power of a Poly Chain® GT Carbon™.

- High mechanical resistance
- No extra thickness at the joint / compatible with the use of wipers
- No change to minimum winding diameter
- Metal or polyacetal rods (if metal detectors are used)
- Suitable for all types of Conveyor Belt with a thickness greater than 1.5mm

Round and V-belts are assembled by longitudinal screwing into two mechanical parts embedded in the belt.
In all cases, the mechanical system is linked to the tensile core to ensure maximum mechanical strength. (Can also be used on belts without a tension core).

These belts are made to length and can be spliced. They are mainly used for conveying or positioning. There are different tooth profiles.

The modular Belt is designed to allow any cleat to be screw-fastened.

The cleats can be replaced without dismantling the Belt.
The distance between cleats is precise (equal to the pitch of the Belt)
The cleats are fastened in a very strong manner (fastening nuts with M4 brass or plastic threads)
Operates on standard AT type Pulleys.

We can work with all the coatings used in the belt and conveyor belt industry (polyurethane, PVC, foam, rubber) with or without structure on any type of support (flat, toothed, ribbed, V-belt or conveyor belt).

- Assembly of the cleats on the Belt by melting the material
- Possibility of combining PAZ, various coatings, ERO and machining operations
- Installation of specific cleats: screwed cleats in particular (false brass teeth)

Round belts for roller conveyors,

Twisted Belt, hook fastener,

Polyurethane ribbed belt,

Tangential Belt,

Tools,

Elastic belts.

The POSICLEAN® PC20 food belt, manufactured by GATES and processed in our workshops, is a synchronous polyurethane belt. It has been designed to replace modular belts and other plastic chains in order to facilitate the cleaning of preparation lines in the food industry.
It has embedded aramid traction Cords to limit belt elongation, and perfectly smooth surfaces for easy cleaning. It is totally hermetic, which reduces microbial growth.

FLATCLEAN FC12™ food-grade belt, manufactured by GATES and processed in our workshops, is a flat polyurethane belt reinforced with aramid tensile cords. This belt is designed specifically for food applications.
It has smooth surfaces and sides that are easy to clean.

Discover our documentation for conveying glass sheets.

TANALS has been supplying leading flat glass processors for over 20 years.

Belts for optical sorters are made from a hydrolysis-resistant polyurethane, which extends service life in wet applications and reduces the growth of bacteria.

The polyurethane blend is stain resistant, reduces discolouration and enhances optics.

High-quality polyurethane ensures strong welds and reduces the risk of belt breakage.

PEVETAN' Conveyor Belts are made up of a set of superimposed polyester plies that provide the necessary rigidity and mechanical strength.

They are covered with a PVC (polyvinyl chloride) top cover that can be adhesive, slippery or structured.

They have a wide range of applications, and can be used in all sectors of activity.

POLYTAN' Conveyor Belts are made up of one or more polyester plies which provide the necessary rigidity and mechanical strength.

They are covered with a cut-resistant PU (Polyurethane) or SI (Silicone) top cover.

They are generally chosen for their high resistance to oils and greases, particularly in the food industry.

GRAFICTAN' Conveyor Belts are made up of a set of polyester plies or a polyamide Reinforcement which defines the mechanical properties and stiffness of the belt.

They are covered with an NBR (elastomer) coating on one or both sides, giving them high abrasion resistance.

They are generally used in the graphic arts industry to transport paper or cardboard, and are all antistatic.

THERMOTAN' Conveyor Belts are either made from a single-piece PU material, or from a polyester tensile element.

They are heat-sealable, so can be spliced together without the use of glue, in a very short time. The joint is fused and has no hard points.

One-piece elastic PU belts are used for applications with a fixed centre-to-centre distance. They are chosen for their ease of installation and maintenance.

Belts made up of two friction layers of acrylic nitrile, better known by the general term "elastomer".

The PA6 polyamide tensile member placed in the centre of the Belt is made of heated granules, extruded and then stretched to form a compact element.
The antistatic polyamide fabric placed between the tension member and the friction layers reduces the static electricity generated by the rotation of the Belt (electromotive phenomenon).

- 3mm pitch, teeth compatible with 3MR GT, 3M HTD and 3M RPP pulleys
- Polyurethane compliant with food regulations (1935/2004 and 2023/2006, directive 2002/72/EC)
- Aramid Cords

Tistan belts are endless (no gluing or splicing) and made to measure.

The joint is made by a simple knot. It is stronger than any soldered joint.
With a soldering iron fitted with a U-shaped tip, it is possible to solder the sheath to obtain a continuous outer surface.

GeQo Drive® is an 8M belt with an STD tooth form optimised to reduce noise.

The GeQo Drive® is guided by the easy drive® system, which ensures precise operation and accepts large pulley misalignments without the use of flanges.

The innovative construction of the Easydrive® Guide opens up new opportunities for users of Synchronous belts and Pulleys.

GATES Synchronous belts feature an original construction designed for optimum performance on high-torque, low-speed drives.

Elastic one-piece Conveyor Belts are particularly useful for a variety of unpackaged food product conveying applications.

These belts also offer a wide variety of options for combining surface structures, material characteristics and colours.

Timing belts in one-piece polyurethane, compliant with EC 1935/2004 food regulations and EU 10/2011 directive.

WR10 belts with embedded Reinforcement are ideal for use in environments with a high moisture content.

Thanks to this new range of products, a production line equipped with a metal detector can be stopped in the event of contamination by a piece of Belt.
Our special blue PU contains very fine particles that can be detected by any standard metal detector.

Tooling is available for T10, AT10, T20, AT20, H, 8M and 14M pitches for all belt widths. They can be made for assembly using threaded rods or screws.

Simple assembly
We supply ropes and open hooks to the chosen length
A clip is all you need to close the assembly.

Elastic polyurethane belts for dynamic weighing applications, checkweighers and peripheral conveyors.

Polyurethane Synchronous belts are made to order.
Their performance means they can replace chloroprene or neoprene driving belts on many installations.
Their service life may be shortened, but they can be used for repairs in the vast majority of cases.

Timing belt 16 T5 455 with 2 mm moulded polyurethane coating