Draw belts are used on a draw track
The belts are installed in the extrusion process of PVC profiles, rubber, pipes, tubes, etc.
The Belt is woven endlessly (moulded) = no junction of weft and cover
The inside length corresponds to the manufacturing rib.
Hauteur
Draw belts for PVC extrusion lines
Image
Pulling core without splice :
Cover :
- Rubber from 40 to 65 shore A
- PVC (Polyvinyl) from 35 to 90 shore A
- PU (polyurethane) from 50 to 90 shore A
Machining of transverse grooves = reduction in belt winding diameter
Machining of longitudinal grooves = product guidance
Can be produced on ribbed belts (Poly V) - J/K/L/M profile
